However, things are a bit more complicated than this, as there is often confusion about where Hoover vacuums are actually built.
Many owners don’t realise they need to use both lids to fully empty the vacuum..Check your manual for your machine’s specific instructions, but here’s the basic process for emptying a Shark Lift-Away:.
Unplug the vacuum (always unplug a corded vacuum before performing any maintenance)..Remove the dust cup from the vacuum by pressing the button at the top of the main body and tilting the cup towards you..Hold the dust cup over a bin and press the bottom release tab to allow the contents to fall into the bin.
Give it a quick shake or tap to dislodge any stuck debris.. Now use the top release tab to open the top lid while holding the cup over the bin.Again, give it a little shake or tap.
We find that hair sometimes gets caught around the metal shroud inside the second compartment of the Shark Lift-Away, so you may need to pull this out by hand (use gloves).. Close both of the lids and reattach the cup to the vacuum.. It’s a good idea to check the pre-motor filter when emptying the vacuum.
If it’s starting to look clogged or dirty, then it’s probably time to clean it..These substances can stick your vacuum cleaner’s brush bristles together, block its filter, and damage its motor.
They could also melt inside the machine, putting its motor permanently out of action.. Summary.There are many things you shouldn’t vacuum with a domestic vacuum cleaner.
These include liquids, broken glass, wet food, and makeup.. It’s important to know what your vacuum can’t handle.As a general rule, anything that’s sticky, wet, or sharp should never be vacuumed if you want your machine to last.. Do you have any questions about things that you shouldn’t vacuum?
(Editor: Rechargeable Shoes)